twigUI

Spruce for the GKD Pixel 2

Installation

Caution

The installation process will wipe everything in your microSD card, make backups of any data you might want to preserve.

To install:

• Download balenaEtcher
• Download an install image from the releases page and extract the .img file.
• Remove the microSD card from your handheld and insert it into a microSD card reader.
• Run balenaEtcher, click on Flash from file and select the previously downloaded twigUI.img file.
• Click on Select target and select the microSD card previously inserted.
• Click on Flash! and wait for the process to finish.
• Once the flashing process is done remove the microSD card from the reader, insert it into your handheld and long press the power button to power it up.

Updating

• Turn off your handheld and remove the microSD card
• Remove the microSD card from your handheld and insert it into a microSD card reader.
• Download an update image from the releases page and extract it.
• Open the ROMS partition of your microSD card and remove everything except the following folders:
  • Roms
  • Saves
  • Persistent
  • Collections
  • BIOS
• Copy the extracted files from the update .7z file into the ROMS partition of the microSD card.
• When prompted, allow the new files to replace the existing ones.
• Once the copying process is done remove the microSD card from the reader, insert it into your handheld and long press the power button to power it up.