LPC810 CodeBase

Open source code base for the ARM Cortex M0+ LPC810 family from NXP.

This code base is intended to work with the LPC810 in a DIP8 package. While these drivers are based on the original LPC800 example code from NXP, the LPC810 has limited resources (4KB flash and 1KB SRAM), so smaller, lighter-weight drivers had to be written to get the most out of these resources we have.

The current code implements the following peripheral drivers:

A basic SPI driver
Some simple GPIO helper functions (although GPIO should normally be accessed directly via the appropriate registers)
A simple driver for UART0 and printf-redirection that allows 'printf' output to be transmitted to UART0
A basic multi-rate timer driver that allows us to set delays

The code base also implements a mini printf that takes up much less space than the default printf used in most libc variants. If necessary, it's easy to change the printf redirection to a location other than UART0 via the printf-redirection.c file.

Using the Makefile

If you wish to use 'make' from the command-line, you can run the following commands:

make clean
make all

Common 'Make' Errors

make: arm-none-eabi-gcc: No such file or directory

If you get this error, you need to add the '/bin' folder of your toolchain to your 'system path' variable.

On OS X or Linux this can be done with the following command (GCC ARM Embedded 2014 Q2 used below, stored in the user's /Downloads folder):

export PATH=$HOME/Downloads/gcc-arm-none-eabi-4_8-2014q2/bin:$PATH

You can test if GCC is available on the system path by running the following command:

arm-none-eabi-gcc --version

microbuilder/LPC810_CodeBase

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Contributors 8

Uh oh!

Languages

Packages